Skip to content

Salicru TWIN RT3 1000 VA UPS: Unboxing and Real-World Use

21/11/2026

As an Amazon Associate, I earn from qualifying purchases. En calidad de Afiliado de Amazon, obtengo ingresos por las compras adscritas que cumplen los requisitos aplicables. If you buy through these links, the price is the same for you and Amazon pays me a small commission that helps keep Tecnoyfoto running.

The Salicru SLC-1000-TWIN RT3 is a 1000 VA, 1000 W online double-conversion UPS. Salicru sent me the unit in the video. I set it up at my desk to protect my computer and the other equipment there, then ran a cable to the area where I keep my router.

A closer look at the UPS

The unboxing video is in Spanish. It shows the UPS and its convertible enclosure. You can stand it upright or install it in a compatible rack. The front display rotates to suit either orientation. Check the rack depth and leave room for cables and airflow before deciding where it will go.

Front of the Salicru Twin RT3 UPS
Rear outlets of the Salicru Twin RT3 UPS

The 1000 VA model has eight IEC C13 outlets, split into two groups of four for critical and noncritical loads. Check the power cord for each device and which group you want to use. This exact model is designed for 200–240 V nominal systems. If you’re shopping in the United States, check the voltage and connectors on both your circuit and your equipment before considering this European-market unit. A plug adapter doesn’t change the voltage.

Specs for the unit in the video

SpecificationSLC-1000-TWIN RT3
Rated capacity1000 VA / 1000 W
TopologyOnline double conversion
Nominal voltage200, 208, 220, 230, or 240 V, depending on configuration
Outlets8 IEC C13, 4 + 4
EnclosureConvertible tower/rack with rotating display
CommunicationsUSB, RS-232, Ethernet, and an optional card slot, per Salicru

A unity output power factor means this model is rated for 1000 W as well as 1000 VA. Conversion efficiency is a separate specification that depends on operating mode. In normal online operation, the inverter supplies the output. In bypass, the load can be supplied directly from the incoming line when the UPS allows it.

What I saw after putting it to work

In my follow-up Home Assistant video, the display showed 234.7 V in and 229.6 V out at one point, with the UPS set to 230 V. The load reading was 16% and the battery charge was 100%. They describe different things. These are readings from my setup at that moment.

If you need enough time to shut down a NAS or keep the network running through a short outage, look up runtime at your measured load in watts. Battery condition and expansion modules can affect that result. The voltage readings don’t tell us how long the battery lasts or how loud the fan is.

I used Ethernet and read-only Modbus TCP in my setup to bring measurements into Home Assistant. Check the exact UPS model and network interface if that’s a feature you’re buying it for.

What to compare before buying

For a 230 V online UPS in the same power class, compare the Eaton 9PX 1000i RT2U and APC Smart-UPS SRT1000RMXLI on runtime at your load, outlets, monitoring options, and rack hardware. Those are spec-sheet references; I didn’t run a side-by-side test.

Amazon Spain lists these three Salicru TWIN RT3 models. The 1000 VA model is the one in the video.

These are Amazon Spain affiliate links. As an Amazon Associate I earn from qualifying purchases.

See the manufacturer’s 1000 VA model page for the full electrical specs and battery options.

Continue reading

Next related guide · 10 min read

Is Daylight Saving Time Ending in 2027? What Really Changes and Why It Matters for Technology

Is daylight saving time ending in 2027? If you have seen headlines suggesting the world is about to stop changing its clocks, you might…

Continue with this article